Answer
Sep 04, 2024 - 08:32 AM
To use your Excalibur remote start system, follow these steps:
-
Ensure Safety Conditions are Met:
- Make sure your vehicle is in Park (for automatic transmissions) or Neutral (for manual transmissions equipped with a compatible safety switch). All doors, the hood, and the trunk should be fully closed, and the brake pedal should not be pressed. Ensure the system is not in Valet Mode, as this mode disables the remote start function.
-
Activate Remote Start:
- On your Excalibur remote, locate the remote start button, which is typically marked with a circular arrow or a circular arrow with a car icon. Press and hold the remote start button for 2-3 seconds. The parking lights will flash to indicate that the remote start command has been received, and the engine will start.
-
Confirm the Vehicle Has Started:
- The engine will start, and the parking lights will typically remain on while the vehicle runs remotely. The vehicle will run for a pre-set period, usually between 10 to 20 minutes. You can enter your vehicle and start driving by unlocking the doors with your remote and inserting the key into the ignition, turning it to the "ON" position, and pressing the brake pedal to complete the takeover process.
-
Turn Off Remote Start (If Needed):
- If you want to turn off the engine while it is running remotely, press the remote start button again on the remote. This will shut off the engine and end the remote start sequence.
By following these steps, you can conveniently start your vehicle remotely using the Excalibur remote start system, providing comfort and convenience, especially in extreme weather conditions.
Add New Comment