Answer
Sep 04, 2024 - 08:22 AM
To activate keyless entry on your RS370 Excalibur system, you typically use the transmitter (key fob) that has been programmed to your vehicle's Excalibur system. The RS370 Excalibur system is a remote start and security system that often includes keyless entry functions to lock and unlock your vehicle's doors. Here’s how to activate keyless entry on the RS370 Excalibur system:
Steps to Activate Keyless Entry on the RS370 Excalibur System:-
Ensure Your Transmitter is Programmed:
- Before you can activate keyless entry, make sure your Excalibur transmitter (key fob) is properly programmed to your vehicle's RS370 Excalibur system. If it isn't programmed, you will need to follow the programming steps outlined in the user manual or earlier in this conversation.
-
Use the Transmitter Buttons:
- The transmitter (key fob) for the RS370 Excalibur system typically has several buttons, each with different functions:
- Lock Button: Pressing this button will lock all the doors of your vehicle.
- Unlock Button: Pressing this button will unlock the doors of your vehicle.
- The transmitter (key fob) for the RS370 Excalibur system typically has several buttons, each with different functions:
-
Locking the Vehicle:
- To lock your vehicle using the RS370 Excalibur system, press and release the "Lock" button on your transmitter.
- The vehicle's parking lights may flash, and you may hear a chirp from the system confirming that the doors have been locked.
-
Unlocking the Vehicle:
- To unlock your vehicle using the RS370 Excalibur system, press and release the "Unlock" button on your transmitter.
- The parking lights will usually flash, and you may hear a chirp or other audible confirmation from the system indicating that the doors have been unlocked.
-
Activate Trunk Release (if equipped):
- Some RS370 Excalibur systems come with an option for remote trunk release. If your system has this feature, press and hold the "Trunk" button on your transmitter for 2-3 seconds to open the trunk remotely.
-
Silent Arm/Disarm (if applicable):
- To silently arm or disarm the system without an audible chirp, press the "Lock" or "Unlock" button twice within 2 seconds. The parking lights will still flash to indicate the command was received, but there will be no chirp.
- Keyless Entry Mode Settings: The Excalibur RS370 system may have different settings for keyless entry, such as passive arming/disarming or settings that control how the system behaves when locking or unlocking (e.g., driver door priority unlocking, where one press unlocks only the driver’s door and a second press unlocks all doors).
- Valet Mode: If the system is in Valet Mode, keyless entry may still work, but other security and remote start functions will be disabled. Valet Mode is typically activated or deactivated by using the Valet/Override button.
- Transmitter Battery: Ensure the battery in your transmitter (key fob) is functioning properly. If the range is reduced or the buttons are unresponsive, consider replacing the battery.
- System Programming: Verify that the transmitter is correctly programmed to the RS370 Excalibur system. If unsure, reprogram the transmitter using the programming steps provided in the user manual.
- Interference: Be aware of potential signal interference from other electronic devices or strong radio signals that could affect the transmitter's performance.
To activate keyless entry on the RS370 Excalibur system, use the programmed transmitter to lock or unlock your vehicle by pressing the corresponding buttons on the key fob. Ensure your transmitter is programmed correctly, the system is not in Valet Mode, and the transmitter battery is working. Always refer to your RS370 Excalibur user manual for specific instructions and additional features, as different models may have varying functions and capabilities. If you encounter any issues or need further assistance, consider contacting the manufacturer or a professional installer.
Add New Comment