Answer
Sep 04, 2024 - 08:20 AM
To program your RS370 Excalibur keyless entry transmitter, you'll need to follow specific steps to synchronize the transmitter (remote) with your vehicle's Excalibur alarm or keyless entry system. The RS370 Excalibur is a model of remote start and security systems manufactured by Omega Research & Development, and the programming process may vary slightly depending on the vehicle and system configuration.
Here’s a general guide to help you program your Excalibur keyless entry transmitter:
Programming Your Excalibur RS370 Keyless Entry Transmitter:-
Prepare for Programming:
- Ensure that all doors are closed and the ignition is in the "OFF" position. It's essential that the vehicle is not running and all accessories are off.
- Have all transmitters (key fobs) you intend to program ready, as they typically need to be programmed in the same session.
-
Enter Programming Mode:
- Insert the key into the ignition and turn it to the "ON" position (do not start the engine).
- Within 5 seconds, press the "Valet/Override" button (often a small button located under the dash or on the steering column) 3 times. The vehicle’s parking lights may flash, or you may hear a chirp indicating that you have entered programming mode.
-
Program the Transmitter:
- Press and hold the lock button (or another designated button, depending on the model) on the first transmitter for about 3 seconds. You should hear a chirp or see the parking lights flash, indicating that the transmitter has been programmed successfully.
- If you have additional transmitters to program, press and hold the lock button on each additional transmitter within 10 seconds of programming the previous one. The system allows multiple transmitters to be programmed in one session.
-
Exit Programming Mode:
- After all transmitters have been programmed, turn the ignition to the "OFF" position to exit programming mode. The parking lights may flash again, or you may hear another chirp, indicating that programming mode has ended.
-
Test the Transmitter:
- Test each programmed transmitter to ensure that it properly locks and unlocks the doors and operates any other functions, such as remote start or trunk release.
-
Valet/Override Button Location: The Valet/Override button is usually hidden under the dash, near the fuse box, or on the lower part of the steering column. It is often a small black button, but its exact location can vary depending on the installation.
-
Number of Transmitters: Most systems can accommodate multiple transmitters, but if you exceed the system’s limit, you may need to erase all existing transmitters and reprogram them from scratch.
-
Vehicle-Specific Instructions: If your system does not respond as described, or if there are additional features or specific sequences required for your vehicle model, refer to your RS370 Excalibur user manual or consult with the installer.
-
Lost or Missing Valet/Override Button: If you cannot locate the Valet/Override button, or if you are having trouble entering programming mode, it may be best to contact a professional installer or the Omega Research & Development customer support team for assistance.
Programming your RS370 Excalibur keyless entry transmitter involves entering programming mode via the Valet/Override button and synchronizing each transmitter by pressing the lock button. Always refer to your specific Excalibur system manual for the most accurate instructions, as the process can vary slightly depending on the model and vehicle configuration. If you encounter any difficulties, a professional installer or Omega's customer support team can provide additional assistance.
Add New Comment