Answer
Sep 04, 2024 - 06:42 AM
Blending Lucas Oil Synthetic Heavy Duty Oil Stabilizer (product number 10131) with your engine oil is a straightforward process. This additive is designed to enhance the performance and longevity of your engine oil, particularly in high-stress or high-mileage applications. It is compatible with both synthetic and conventional motor oils and can be used in gasoline and diesel engines. Here's how to blend it properly:
Steps to Blend Lucas Oil Synthetic Heavy Duty Oil Stabilizer:-
Warm Up the Engine:
- Start your vehicle and let the engine warm up to its normal operating temperature. This helps the oil and stabilizer blend more effectively.
-
Check Oil Level:
- Check your vehicle’s oil level using the dipstick to ensure it is at or slightly below the full mark. You may need to drain a small amount of oil if it is already at the maximum level to avoid overfilling when you add the stabilizer.
-
Determine the Correct Amount of Stabilizer:
- Lucas Oil recommends using 20% of the total oil capacity in engines for regular use.
- For vehicles that are frequently towing or operating under heavy loads, up to 50% of the oil capacity can be replaced with the stabilizer.
- Example: If your engine holds 5 quarts (4.7 liters) of oil, add 1 quart (0.95 liters) of Lucas Oil Synthetic Heavy Duty Oil Stabilizer (20% of total capacity).
-
Pour the Stabilizer:
- With the engine off, carefully pour the appropriate amount of Lucas Oil Synthetic Heavy Duty Oil Stabilizer directly into the engine through the oil filler cap. Use a funnel to prevent spills.
-
Check Oil Level Again:
- After adding the stabilizer, wait a few minutes for it to settle. Recheck the oil level with the dipstick to ensure it is within the recommended range. Adjust if necessary by adding more engine oil or stabilizer.
-
Run the Engine:
- Start the engine and let it run for a few minutes. This will allow the oil stabilizer to mix thoroughly with the engine oil. Running the engine ensures that the stabilizer is distributed throughout the oil system, including the oil pump, oil filter, and various engine components.
-
Monitor Oil Level and Condition:
- Regularly check the oil level and condition during routine maintenance. Lucas Oil Stabilizer helps reduce oil consumption and engine wear, so you may notice a reduction in oil loss and sludge buildup.
- Reduces Friction and Wear: Enhances the lubricating properties of your engine oil, reducing friction and wear on moving parts.
- Improves Oil Pressure: Helps maintain optimal oil pressure in high-mileage or high-stress engines.
- Prevents Oil Breakdown: Extends the life of your engine oil by preventing thermal breakdown and oxidation, especially in extreme temperatures.
- Reduces Oil Consumption: Helps reduce oil consumption in older or high-mileage engines by improving oil viscosity and preventing leaks.
- Minimizes Dry Starts: Adds a protective coating on engine parts, reducing the risk of dry starts after the vehicle has been sitting for an extended period.
- Compatibility: The stabilizer is safe to use with all types of engine oils, including synthetic, semi-synthetic, and conventional oils.
- Do Not Overfill: Always ensure that you do not exceed the maximum oil level recommended for your engine to avoid potential damage.
- Follow Manufacturer Guidelines: While Lucas Oil provides general recommendations, always consult your vehicle's owner's manual or a professional mechanic for advice specific to your engine and operating conditions.
By following these steps and guidelines, you can effectively blend Lucas Oil Synthetic Heavy Duty Oil Stabilizer into your engine oil for enhanced protection and performance.
Add New Comment