Answer
Sep 03, 2024 - 09:47 AM
The RS370 Excalibur Remote Start/Keyless Entry System with a 1500-foot range is not a direct plug-and-play system for a 2007 Ford Taurus. While the RS370 is a versatile remote start and keyless entry system, installing it in a 2007 Ford Taurus requires some wiring and additional components to integrate with the vehicle’s existing systems. You would need the Omega by pass module found at this link: https://www.autocado.com/p/olbladeal6...
Why It's Not Plug-and-Play:
-
Vehicle-Specific Wiring: The RS370 system needs to be wired into the vehicle's ignition, power, and door lock systems. Ford Taurus models from 2007 do not have a standard plug that directly connects to aftermarket remote start systems, so you will need to connect wires manually or use a T-harness designed for your vehicle.
-
Bypass Module Required: The 2007 Ford Taurus is equipped with a factory anti-theft system (PATS – Passive Anti-Theft System). To install a remote start system, you will need a bypass module to temporarily bypass the factory immobilizer when remotely starting the vehicle. The bypass module is not included with the RS370 and must be purchased separately.
-
Wiring Knowledge and Skill Needed: Installing the RS370 involves connecting wires to specific points in the vehicle’s wiring harness, such as ignition wires, brake wire, parking light wire, and door lock/unlock wires. This installation requires a good understanding of automotive wiring and possibly a wiring diagram for the 2007 Ford Taurus.
-
Purchase a Bypass Module:
- For the 2007 Ford Taurus, you’ll need a bypass module compatible with Ford’s PATS system. Modules like the Fortin EVO-ALL or iDatalink ADS-AL CA are commonly used for this purpose.
-
Gather Installation Tools and Materials:
- Wire strippers and crimpers
- Soldering iron or butt connectors
- Electrical tape or heat shrink tubing
- Test light or multimeter
- Vehicle-specific wiring diagram
-
Connect the RS370 System:
- Follow the RS370 installation guide to connect the system to the appropriate wires in the Taurus. Key connections include:
- Ignition Wires: For remote start functions.
- Power and Ground Wires: To power the system.
- Door Lock/Unlock Wires: For keyless entry functionality.
- Brake Wire: Safety feature to disable remote start when the brake pedal is pressed.
- Follow the RS370 installation guide to connect the system to the appropriate wires in the Taurus. Key connections include:
-
Install the Bypass Module:
- Install the bypass module according to the manufacturer’s instructions. The bypass module will need to be programmed to work with your Ford Taurus’s anti-theft system and paired with the RS370 remote start system.
-
Test the System:
- After installation, test all functions (remote start, lock/unlock, trunk release) to ensure the system is working correctly and that the bypass module successfully overrides the anti-theft system during remote start.
The RS370 Excalibur Remote Start/Keyless Entry System is not a direct plug-and-play system for a 2007 Ford Taurus due to the need for additional wiring and a bypass module to integrate with the vehicle’s factory anti-theft system. Proper installation requires some automotive wiring skills, the correct bypass module, and careful following of instructions. If you are not comfortable with these tasks, it is recommended to have the system installed by a professional installer or automotive electronics technician to ensure safe and proper operation. Please use this bypass module https://www.autocado.com/p/olbladeal6...
Add New Comment