Answer
Sep 03, 2024 - 08:22 AM
Programming the EVO-ONE Fortin All-In-One Remote Starter System involves a few steps to ensure the system is correctly paired with your vehicle and its key fobs or remotes. The EVO-ONE is a versatile remote starter and bypass module that works with various vehicles, so the programming process may vary slightly depending on your vehicle make and model.
Programming the EVO-ONE Fortin Remote Starter System:1. Preparation:
- Ensure All Connections are Correct: Before programming, make sure the EVO-ONE module is properly installed in your vehicle and connected to all necessary wiring harnesses.
- Check the Vehicle’s Battery: Ensure your vehicle's battery is fully charged to avoid interruption during the programming process.
- Close All Doors: Ensure all doors, the hood, and the trunk are closed to prevent interference with the programming sequence.
2. Enter Programming Mode:
-
Turn the Ignition On: Insert your vehicle key into the ignition and turn it to the "ON" position (do not start the engine).
-
Access the Module’s Programming Button:
- Locate the programming button on the EVO-ONE module. It is typically a small, black button on the module itself.
- Press and hold the programming button on the module. While holding the button, turn the ignition off, then back on to the “ON” position again.
- Release the button when the module’s LED light turns red. This indicates that the module is in programming mode.
-
Select the Programming Mode:
- The LED on the module will now start flashing in different sequences. The flashing sequences represent different programming modes.
- Refer to the EVO-ONE installation manual to determine the specific mode required for your vehicle (e.g., 2 flashes for automatic transmission or 3 flashes for manual transmission).
-
Confirm the Programming Mode:
- Once the LED displays the correct number of flashes for your mode, press and release the programming button to select the mode.
- The LED should stay solid to confirm the selected mode.
3. Pairing the Remotes:
-
Prepare the Remote(s):
- Ensure you have the remote(s) you wish to pair with the system nearby and ready for programming.
-
Activate the Remote Pairing Mode:
- With the ignition in the "ON" position, press and release the programming button on the EVO-ONE module again. The LED will start flashing blue, indicating it is in remote pairing mode.
-
Press the Remote Button:
- On the remote, press the lock button (or another specified button, depending on your remote model) for 1-2 seconds.
- The LED on the EVO-ONE module should flash green, indicating successful pairing with the remote.
-
Repeat for Additional Remotes:
- If you have additional remotes, repeat the above step for each remote.
-
Exit Programming Mode:
- Once all remotes are programmed, turn the ignition off. The LED on the EVO-ONE module will turn off, indicating that it has exited programming mode.
4. Testing the Remote Start System:
-
Test Remote Start Functionality:
- After programming, test the remote start function to ensure the system works correctly. Lock the vehicle using the remote and then press the start button to activate the remote starter.
- The vehicle should start, and the parking lights or other indicators should confirm the remote start is active.
-
Check Additional Features:
- Test other features such as keyless entry, trunk release, and remote shutdown to ensure all programmed functions are working properly.
5. Troubleshooting:
- If Programming Fails: If the LED does not respond as expected or the remote does not work after programming, you may need to repeat the programming steps. Ensure all connections are secure and follow the steps precisely.
- Refer to the Manual: The specific steps and LED indications can vary depending on your vehicle make and model. Always refer to the EVO-ONE user manual for model-specific instructions.
- Contact Technical Support: If you encounter issues or need additional assistance, contact Fortin technical support or consult a professional installer.
Programming the EVO-ONE Fortin All-In-One Remote Starter System involves entering programming mode, selecting the correct mode for your vehicle, pairing the remotes, and testing the system. Carefully following each step and referring to the installation manual for your specific vehicle will help ensure successful programming and functionality of your remote starter system.
Add New Comment