Answer
Aug 18, 2024 - 06:56 AM
Operating your EVOONE442 Fortin EVO-ONE remote starter is simple and involves using the remote to control various functions of your vehicle. Here’s how you can operate the remote starter:
1. Locking and Unlocking the Vehicle- Locking the Vehicle:
- Press the Lock button on the remote. This will lock all doors, and the parking lights will flash to confirm the action.
- Unlocking the Vehicle:
- Press the Unlock button on the remote. This will unlock the doors, and the parking lights will flash to indicate the vehicle is unlocked.
- Start the Engine:
- Press and hold the Start/Stop button (typically represented by a circular arrow) for 3-4 seconds.
- The parking lights will flash to confirm that the start command has been received, and the engine will start.
- The parking lights will stay on while the engine is running.
- Your vehicle’s climate control system (e.g., heater, air conditioner) will activate according to the settings you had before shutting off the vehicle.
- Unlock the Vehicle:
- Press the Unlock button on the remote to unlock the doors.
- Prepare to Drive:
- Insert the key into the ignition and turn it to the "ON" position (if your vehicle requires a key).
- For vehicles with push-to-start, press the brake pedal and then press the start button as you would normally.
- Shift into gear and drive as usual.
- Stop the Engine:
- If you need to turn off the engine remotely, press and hold the Start/Stop button again for 3-4 seconds.
- The engine will stop, and the parking lights will turn off.
- Open the Trunk:
- Press and hold the Trunk Release button (usually represented by a trunk icon) on the remote.
- The trunk will open, and the remote may give a confirmation signal.
- Activate Panic Mode:
- Press and hold the Lock button for 3 seconds to activate panic mode.
- The vehicle’s horn will sound, and the lights will flash.
- Press the Unlock button to deactivate panic mode.
- Check Feedback:
- If you have a two-way remote, it will provide feedback such as a beep, vibration, or light to confirm that the command (start, stop, lock, unlock) was successfully executed.
- Operate Within Range:
- The effective range of the remote may vary depending on obstacles, interference, and battery strength. If you notice a decrease in range, consider replacing the remote’s battery.
- Monitor Battery Level:
- Keep an eye on the battery level of your remote. If the battery is low, replace it to ensure the remote operates correctly.
-
If the Engine Doesn’t Start:
- Ensure that the vehicle is in a safe state to start (e.g., in Park for automatic transmissions, parking brake engaged for manual transmissions).
- Check that all doors, the hood, and the trunk are properly closed.
- Verify that the remote is within range and that its battery is charged.
-
No Response from the Remote:
- If the remote doesn’t work, try moving closer to the vehicle or replacing the battery.
- Ensure that the EVO-ONE module is properly installed and configured.
By following these steps, you can effectively operate your EVOONE442 Fortin EVO-ONE remote starter to enjoy the convenience of remotely starting, locking, and unlocking your vehicle.
Add New Comment