Answer
Aug 18, 2024 - 06:28 AM
Configuring the EVOONE442 Fortin EVO-ONE remote starter involves setting up the system according to your vehicle’s specific requirements and personal preferences. Here's a step-by-step guide to help you configure the remote starter:
1. Gather Necessary Tools and Resources- Fortin Flash Link Updater (for programming and firmware updates)
- Computer with internet access
- Vehicle-specific wiring harness (should be included with your EVO-ONE kit)
- Fortin Flash Link Manager Software (downloadable from Fortin’s website)
- Vehicle’s User Manual and EVO-ONE Installation Guide
- Disconnect the Vehicle Battery: To avoid electrical shorts, disconnect the negative terminal of the battery.
- Install the EVO-ONE Module: Follow the vehicle-specific wiring diagram to connect the module to your vehicle’s ignition system, CAN bus, and other necessary components.
- Mount the Module: Secure the module in a hidden yet accessible location under the dashboard.
- Plug in the Flash Link Updater: Connect the Flash Link Updater to your computer via USB.
- Connect the EVO-ONE Module: Use the programming cable to connect the EVO-ONE module to the Flash Link Updater.
- Launch the Flash Link Manager Software: Open the software on your computer.
- Select Your Vehicle: In the Flash Link Manager software, select your vehicle’s make, model, and year. This step ensures that the appropriate firmware and settings are applied to the module.
- Update Firmware: If necessary, update the firmware on the EVO-ONE module to the latest version available for your vehicle.
- Configure Settings:
- Remote Start Settings: Choose options such as engine runtime, turbo mode, and tachometer settings.
- Bypass Settings: Configure how the EVO-ONE interacts with your vehicle's factory immobilizer system.
- Comfort Features: Adjust features like defroster activation, heated seats, or automatic climate control settings (if supported by your vehicle).
- Save Configuration: Once you have selected the desired settings, save the configuration to the EVO-ONE module.
- Enter Programming Mode: After configuring the module, you may need to program the remote to communicate with the module:
- Turn the vehicle’s ignition to the ON position without starting the engine.
- Press and hold the module’s programming button until the LED lights up, then release.
- Pair the Remote: Follow the specific instructions for pairing the remote, which typically involve pressing buttons on the remote in sequence.
- Test the Remote: Once paired, test all functions of the remote (lock, unlock, start, trunk release) to ensure proper operation.
- Reconnect the Battery: After configuration and programming, reconnect the vehicle’s battery.
- Start the Engine: Test the remote start function to ensure the vehicle starts as expected.
- Check Other Features: Verify that all configured features (e.g., door locks, trunk release, defroster) work correctly.
- If any features are not functioning as desired, reconnect the EVO-ONE to your computer and adjust the settings via the Flash Link Manager software.
- Re-test the system after making any changes.
- Secure Wiring: Ensure all wiring is secured and doesn’t interfere with any vehicle components.
- Reassemble Vehicle Panels: Reassemble any vehicle panels or components that were removed during installation.
- Set User Preferences: After initial configuration, you can fine-tune settings based on personal preferences, such as engine runtime, activation sequences, and more.
- Refer to Manuals: Keep the installation and user manuals handy for future reference.
- Seek Professional Assistance: If you encounter any issues during configuration or installation, consider consulting with a professional installer.
By following these steps, you can configure the EVOONE442 Fortin EVO-ONE remote starter to suit your vehicle and personal preferences, ensuring that the system operates smoothly and effectively.
Add New Comment