Answer
Aug 18, 2024 - 06:25 AM
Starting a car with the EVOONE442 Fortin EVO-ONE remote starter is a straightforward process once the system is installed and programmed. Here’s how you can start your car using the remote:
Steps to Start Your Car:-
Ensure the Vehicle is Ready:
- Make sure the vehicle is parked in a safe and legal location, with the gear in the “Park” position for automatic transmissions, or in neutral with the parking brake engaged for manual transmissions.
- Ensure that all doors, the hood, and the trunk are closed properly.
-
Using the Remote to Start the Car:
- Locate the Remote Start Button: On the EVOONE442 remote, look for the button that represents the remote start function. This button typically has a circular arrow or start icon.
- Press and Hold the Remote Start Button:
- Press and hold the remote start button for about 3-4 seconds.
- The parking lights on your vehicle should flash, indicating that the remote start command has been received.
-
Engine Starts:
- The vehicle’s engine should start, and the parking lights will remain on while the engine is running. Depending on your system setup, the climate control settings may also activate (heating or cooling the vehicle).
-
Enter the Vehicle:
- After the engine starts, you can unlock the doors using the remote.
- Enter the vehicle and insert the key into the ignition (if required) and turn it to the “ON” position.
- For push-to-start vehicles, simply press the brake pedal and push the start button as you would normally do.
-
Drive Away:
- Once the key is in the ignition or the start button is pressed (for push-to-start vehicles), the vehicle is ready to drive.
- Shift into gear and drive as usual.
- Turn Off the Engine Using the Remote:
- If you need to stop the engine remotely, simply press and hold the remote start button again for about 3-4 seconds.
- The engine will turn off, and the parking lights will go out.
- Engine Doesn’t Start: If the engine doesn’t start, ensure that the vehicle is in a proper state to be started (e.g., in Park or Neutral, parking brake engaged, doors and hood closed).
- Range Issues: Ensure you are within the effective range of the remote. If the battery in the remote is low, replace it to improve range.
- Parking Lights Don’t Flash: This could indicate an issue with the installation or programming. Double-check connections and settings.
By following these steps, you should be able to start your car easily with the EVOONE442 Fortin EVO-ONE remote starter.
Add New Comment